Doorstops stop doors from hitting walls

: Several months ago, I paid to have a hole patched in my wall that the doorknob had punched through the drywall. Well, the hole is back again and I realized that there is no doorstop to prevent the door from hitting the wall. What type do you recommend?

A: I suppose the type of doorstop doesn’t really matter, so long as you actually have a doorstop. The doorknob punching a hole in your wall should have been your first clue.

There are two styles of doorstops: one that looks like a stick and gets installed either in the base molding or the door itself, and one that is installed in the door’s hinge pin.

With the type that screws into the base molding, you have another choice: either a rigid post or a spring. The rigid type is better than the spring because there is no give.

If the door is slammed toward the wall and the spring type isn’t mounted so that the impact is directly centered on it, the spring may give enough so that the handle pops into the wall.

The rigid type won’t do this. However, the rigid type has its own disadvantages.

We just happen to have a rigid doorstop at the end of the hall. When my son misbehaves, he gets sent to “time-out” at the end of the hall (for nonparents, this is the equivalent of lockdown for first-time offenders). So what is an angry child supposed to do on his way to lockdown? Why, he stomps on the rigid doorstop of course. This pulls out of the cheap fiberboard base molding and creates another weekend chore.

If you have really nice base molding, you may not want to put a hole in it. Instead, you can use a hinge pin doorstop. These have padded adjustable arms and work well.

If you want to stick with a rigid or spring doorstop, check the sweep of the door and measure in about 11/2 inches from both the bottom and side edges of the door. Drill a one-eighth inch pilot hole and screw it in. For the spring type, you simply screw in the base and then twist in the spring stop.

To install the hinge pin doorstop, it is equally easy. Buy one that matches the finish on the hinges. Use a screwdriver to pry up the hinge pin from the top hinge. Set the doorstop on top of the hinge and push the pin through the stop and finally through the hinge.

Adjust the hinge stop by turning the setscrew to the desired distance. These types of doorstops work well for lightweight hollow-core interior doors. If the door is heavy, install a second hinge stop in the bottom hinge as well. If you don’t do this and someone applies significant force to the door, it could damage the hinge.

Michael D. Klimek is a licensed contractor and president of Pro Handyman Corp. Questions may be sent by e-mail to: questions@pro-handyman.com. Or, mail to: 2301 E. Sunset Road, Box 8053, Las Vegas, NV 89119. His Web address is: www.pro-handyman.com.

ad-high_impact_4
Life
Art Bell’s Top 10 Shows
A selection of radio host Art Bell’s most popular shows.
Calvary Christian Learning Academy, “There was no fair warning.”
Samantha O’Brien, whose three-year-old daughter attended the Calvary Christian Learning Academy daycare, found out Monday night when her daughter’s teacher called about the school closing.
Companies bet their futures on cryptocurrency
Two Las Vegas entrepreneurs talk about finding their niche in blockchain enabled technologies and digital currency.
Solar panels reduce energy bill for CCSD
Wilbur and Theresa Faiss Middle School is one of 42 CCSD schools with solar panel installations, saving approximately $514,000 per year in energy costs.
TOP NEWS
ad-infeed_1x2_1
News Headlines
ad-infeed_1
ads_infeed_2
Local Spotlight
Home and Garden Video
Events
Home Front Page Footer Listing
Circular
You May Like

You May Like