(BPT) – There’s no better way to enjoy the summer than by lounging by the pool. Unfortunately, this backyard family oasis requires regular maintenance throughout the summer that can include expensive and sometimes unhealthy chemicals. Have you ever wished there was an easier way you could clean your pool, that was also more eco-friendly?
Just as there are now “greener” choices for many consumer products, there are now some great alternatives for keeping your pool clean that are easier and actually help minimize chemicals and additives. Technology has come a long way, and consumers can now choose from a variety of affordable and more environmentally friendly ways to maintain their backyard pool.
But how do you choose the right one? Here are some of the best pool-cleaning options available today, along with their pluses and minuses:
Manual pole cleaning: For years this was the standard. Lots of sweat, a hose attached to the skimmer basket on one end, a long vacuum pole on the other and a lot of slow pushing as you try not to disturb the debris before you suck it up into the skimmer and filtration system. This method is cheap and “somewhat green” but involves a lot of effort, and it is not highly effective at reducing your chemical usage.
Suction side pool cleaning: The suction side method is similar to the mechanics of manual pole cleaning except that the cleaner is self-propelled in a random pattern by a suction hose attached to the skimmer system. A completely clean pool is not always achieved due to the random nature of the system. The pluses: low cost and satisfactory results. The minuses: the method lacks optimal pool floor and wall scrubbing and does minimal water mixing, leaving stagnant water areas that actually demand more chemicals to stay clean. Suction side cleaners also use more energy as they require your pool’s filter pump to run during their cleaning cycle.
Pressure side pool cleaning: These units require an independent booster pump and water jet outlet found on some in-ground pools. Note: This is the only option not available for above-ground pools. Pressure cleaners are propelled by water and are often confused with robotic cleaners, but the differences are important. Pressure cleaners do a good job of cleaning but are costly to buy and run. Pluses: cleaning capabilities and better water-mixing capabilities than suction side cleaners. Minuses: pressure cleaners are costly to buy and operate and they use the most energy due to the added booster pump.
Robotic pool cleaning: Advances in robotic pool cleaners are transforming the pool-cleaning industry. Robotic technology has advanced, bringing the price in reach of almost all pool owners. Robotic units can scrub and vacuum pool floors, walls and the waterline and remove more and finer debris (down to two microns in size) to help keep your pool cleaner. Robotic units cost only about 5 cents per hour to run and they provide superior water mixing (up to 85 GPM), substantially reducing the amount of chemicals needed. Pluses: just plug the bot into the power supply, place the cleaner in the water and press a button. Minuses: there are almost too many robotic cleaners to choose from and they are not all alike. One of the most innovative is Aquabot, made by the company that introduced the first robotic cleaner in 1982.
Keeping your pool sparkling clean doesn’t have to mean long afternoons of work or extra unnecessary chemicals. Now that there are safer and easier cleaning methods, you’ll be able to maintain and enjoy your backyard retreat, and take care of the environment at the same time.