62°F
weather icon Clear
Filters Reset
1 - 10 of about 36 Results
Content Type
Categories
Year
Month
older archives
Grinder McGirt takes his best shot at Shriners Open

He signed the scorecard and then stopped at his golf bag for a quick check of things, and when William McGirt noticed there were only 20 messages awaiting on his cellphone, he was a bit surprised.

No. 12, 442 yards, par 4

While many players lick their chops about the hole after the par-4 12th, the par-5 13th, in looking to make birdie or eagle, this tricky par 4 can get them in a foul mood if they don’t play it right. It plays long with its narrow fairway and water that protects the right side of the fairway as well as the front of the green. Add a tough pin placement, as was the case Sunday, when it was tucked in the left front corner, and this hole was more about maintenance than scoring.

Smylie Kaufman uses final-round 61 to win Shriners Open — PHOTOS

The puns on his first name undoubtedly have been used countless times. So let’s just say Smylie Kaufman had a lot to smile about Sunday. The PGA Tour rookie had the best day of his brief professional career, tearing up TPC Summerlin with a final-round 10-under-par 61 and holding off six pursuers to win the Shriners Hospitals for Children Open.

Fowler in need of Sunday uplift at Shriners Open

Rickie Fowler’s day was a mixture of frustration and sadness. The former Oklahoma State All-American appeared to have played himself out of contention Saturday at the Shriners Hospitals for Children Open, falling seven strokes off the lead after shooting 1-under-par 70 at TPC Summerlin.

Na hopes patience pays off with Shriners Open win

Kevin Na is chasing his second career PGA Tour win after shooting a 3-under-par 68 on Saturday, leaving him two strokes behind tournament leader Brett Stegmaier entering today’s final round of the Shriners Hospitals for Children Open.

Shriners Open hole of the day: No. 16, 560 yards, par 5

This is a hole most of the pros can reach in two with little problem. The key is trying to get it close to the pin, which can be problematic depending on where it is set up.

1 2 3 4