weather icon Mostly Cloudy
RJ App
Vegas News, Alerts, ePaper

Purchase multitester to figure out problem with doorbell

Q: For whatever reason, my doorbell has stopped working. I pulled the button away from the wall to check that the wires are still connected, which they are. Now what?

A: Your first option is to buy a remote-operated doorbell for about $25. With this, you stick the new button on the wall and then plug the chime into a nearby outlet. However, a more durable, long-term solution would be to diagnose and fix the problem.

Most doorbell problems are caused by loose wire connections or worn-out switches. To test your system, you will need a multitester (less than $15), which checks voltage and continuity. It will even test batteries for you.

Start by removing the screws that hold the doorbell button to the house. Pull it away from the wall and check that the two wires are securely fastened to the unit. If they aren’t, tighten the screws then test the doorbell.

If it still doesn’t work, disconnect the wires and test the doorbell with the continuity tester. If the meter registers no continuity, the doorbell button needs replacing.

If the button is OK, twist the wires together to test the other parts of the system (don’t worry, this is a low-voltage system, so it won’t curl your hair). Look for the doorbell’s transformer, which is a small metal box about 3 inches tall by 3 inches wide and is likely located near the ceiling in your garage. The transformer has two screws on it with one wire attached to each screw and will have a voltage rating of less than 20.

Set the dial of the multitester to the 50-volt setting, then touch the probes of the multitester to the screw terminals on the transformer. You should get a reading within a few volts of the actual rating on the transformer.

If not, replace the transformer (about $15).

If you get no reading, there may be a loose wire in the box that the transformer sits on. Shut off the power to the transformer at the main panel, remove the cover of the box, then check that the connections are secure.

If the multitester showed the proper voltage, move to the chime unit.

Remove the cover and inspect the low-voltage wire connections. If any are loose, reconnect them.

Next, take the multitester (at the 50-volt setting) and touch the screw terminals inside the chime unit. If the reading shows power within a few volts of the transformer rating, then the chime is receiving the proper current from the transformer. If the test shows no or low power, then there is a break in the low-voltage lines, and new wiring must be installed.

Reassemble the doorbell system and push the button. If the chime doesn’t sound, you need to replace it.

Mike Klimek is a licensed contractor and owner of Las Vegas Handyman. Questions may be sent by email to handymanoflasvegas@msn.com. Or, mail to 4710 W. Dewey Drive, No. 100, Las Vegas, NV 89118. His web address is www.handymanoflasvegas.com.

Don't miss the big stories. Like us on Facebook.
When moving tree, remove some of its canopy

When moving any kind of tree from one location to another, I recommend removing about one-quarter to one-third of the tree’s canopy to compensate for the loss of roots.

Custom live edge tables look great in any decor

Homeowners are often surprised to learn that live edge tables are not solely for traditional or rustic interiors. They add something quite unique to modern homes as well.

Spring blooms in Las Vegas trigger allergies

Pleasant springtime weather unfortunately also brings its share of sniffles and sneezing for seasonal allergy sufferers. In the Las Vegas Valley, specific types of trees, plants, and grasses are often blamed for allergy symptoms.

Replacing screens on windows takes only 30 minutes each

A kit for a 4-by-4-foot window, which will allow you to replace the screen’s frame and rescreen the window, will cost about $35. The kits come in different colors and finishes, but they are all easy to assemble.

Curved trunk of crepe myrtle will straighten out as it grows

As soon as you plant your crepe myrtle, it will start straightening as it grows. The light will come at it from all different directions unlike in the nursery. When you plant it, plant it as straight as possible and let the plant figure it out with new growth.

Citrus cuttings should not be planted upside down

Cuttings from citrus trees should be cut slanted at the bottom and straight across at the top end. Cutting them slanted at the bottom end helps to not confuse the top from the bottom.