weather icon Mostly Clear

Quick fix will banish scary-sounding water hammer

Q: Every time I turn off the water faucet in my laundry room, it sounds like someone is banging on the wall. Is my house possessed by evil spirits? Please help. The noise is frightening my kids.

A: I’m going to banish these noisy ghouls from your house, and I’m bringing along my water hammer.

Actually, water hammer (commonly referred to as “banging pipes”) is the problem, and it occurs when a water fixture is closed suddenly, sending a shock wave through the pipes. This shock wave will travel back and forth until its energy is used up.

A shock wave can also be caused by a person slamming down a faucet handle, like a single-handle kitchen faucet. But most often it’s caused by electric solenoid valves, such as those found in dishwashers and washing machines. These valves stop the flow of water very quickly, creating the shock wave.

Water hammer can also sound like the pipes are vibrating, leading people to believe that the pipes are loose inside the wall. This may be the case, but water hammer can occur even if the pipes are securely fastened. If not, the noise would be much worse — imagine the sound you’d hear when the shock wave knocks loose pipes against the framing of the house.

Water hammer can be prevented by installing a water hammer arrestor (about $15). It acts like a shock absorber by allowing the shock wave to dissipate in its air chamber.

A water hammer arrestor is roughly 8 inches long and has a cylinder about the diameter of a dime. Inside the cylinder is an air chamber, where the shock wave’s energy is absorbed. A diaphragm separates the air chamber from the water in the pipes.

The arrestor should be installed as closely as possible to the source. There are arrestors designed for other areas in the home, but because you’ve isolated the problem to the laundry room, these screw-on gadgets that I mentioned will be just what the doctor ordered.

You can install an arrestor on your washing machine in about five minutes. Actually, you’ll need two arrestors — one for the hot water and one for the cold. The fittings are threaded, so it’s simply a matter of screwing them into the system.

First, turn off the hot and cold water valves in the laundry room. Unscrew the washing machine’s hoses where they connect to the water valves, then screw an arrestor onto each valve.

Screw the hoses onto the arrestor fittings, then turn the water back on. If it leaks, give it another one-eighth turn. It’s that easy.

Once the fix is made, your kids will no longer be scared by things that go bump in the night.

Mike Klimek is a licensed contractor and owner of Las Vegas Handyman. Send questions to handymanoflasvegas@msn.com or 4710 W. Dewey Drive, No. 100, Las Vegas, NV 89118. Visit handymanoflasvegas.com.

Don't miss the big stories. Like us on Facebook.
Watch out for hornworms lurking in your garden

Anyone who has been gardening for a while has a horror story or two about hornworms, which infest many vegetables in the tomato family.

What can be done about high boron levels in soil?

Boron is one of the salts commonly found in desert soils. It can be present naturally or it can accumulate over the years in such places as horse corrals.

Do honeybees prefer pink flowers over white ones?

All of the so-called temperate fruit trees flower in the spring. The white-flowered types such as almonds, plums and pluots, apples and pears usually flower a bit later.

Is redbud tree a good choice for pool area?

My landscaper is recommending a redbud tree in the planter attached to my pool. I asked him if that’s a good tree to plant so close to the pool.

Can scent tell me what kind of plant this is?

You should smell a big difference between bay laurel and cherry laurel, which come from different plant families despite their similar names.